LEGACY MODELS
TD

TD 3000

Back
Hi-Res Manual
  • TOTAL POWER RATING
  • 440W PROGRAM
  • INPUT SENSITIVYTY
  • 1,0V
  • INPUT IMPEDANCE
  • 10K Unblanced
Model TD 3000
Power Specifications
Continuous Power
4 x 340 Watts at 8 ohms (0.5% THD)
4 x 550 Watts at 4 ohms
2 x 1500 Watts at 8 ohm (Bridged mono mode)
Electrical Specification
Input Sensitivity 1.0V
Input Impedance 10K Unbalanced
Frequency Response 20Hz – 20KHz (+0dB / -3dB)
Voltage Gain 32dB
Distortion (SMPTE: 1M) <0.5%
S/N Ratio 110dB
Inrush Current at initial switch on 16.96A
Inrush Current after power supply interruption 19.62A
General Specifications
Front Controls AC power switch, 2 channel level control; -8 to +30 dB
Rear Controls 30 Hz high-pass filter on/off, bridge/stereo/parallel mode
Signal Indicators Signal present (green LED), Clip (red LED), protection (red LED)
Power Indicators 1 blue LED integrated with power switch
Protection On/Off, mute, DC-fault, load
Input Connectors Balanced XLR-F / 1/4" Combo
Power Supply 100VAC or 110-120VAC or 220-240VAC (50Hz/60Hz)
Dimensions Width / Large / High 19” x 14.8” x 3.5” (483 x 376 x 88.8mm)
Weight 7.9 Kg (17.6 Lbs)
Back