SPEAKERS
ZP

ZP10A

Back
  • 4000W - 129dB Total System Peak Power
  • DSP Enhanced Bass Response
  • High Efficiency Class D Amplifier
Model Active ZP-10A
System Type 2-WAY 10" Active Vented Loudspeaker System
Power System Bi-AMP DSP Processor, 1000W continuous RMS (Class D LF-650W+ HF-350W), 4000W peak (2600W LF + 1400W HF)
Continuous Power LOW: 650W / HIGH:350W
Program Power LOW: 1300W / HIGH:700W
Transducer Low 10" (246mm), cone
Transducer High 1" Throat Compression Driver
Crossover Frequency 3.0kHz
Maximum SPL 129dB (peak), 126dB (continuous) (dB-SPL @ 1 m)
Frequency Response 54Hz – 20kHz (-3 dB)
Frequency Range 48Hz – 20kHz (-10 dB)
Horn Coverage 90° horizontal x 60° vertical (nominal)
DSP Preset Modes LIVE-MUSIC-SPEECH-MONITOR
Connectors 2 x XLR+1/4” (6.35mm) TRS combo inputs (Line/Mic ), 1 x 3.5 Stereo AUX IN, 1 x Stereo BT (app control), 1 x XLR mix output (Link), 1 x IEC power cable input
Bluetooth Stereo Stereo L/R-VOL-Pair-Link Switch (app control)
Controls Volume Control knob, AC Power switch, Line / Mic toggle switch, DSP Preset Switch, BT Pair and Link Switch
Indicators Signal / Clip Limiter LED, Four DSP Mode LEDs, BT Pair-Link LED, Power Switch LED
Power Connection: IEC, Voltage: 110–120V~, 220–240V~, 50/60Hz, switchable, Fuse: 100–120V T10AL AC250V, or 220–240V T5AL AC250V, Consumption: 800W
Electronic Protections Electronic clip, thermal and transducer overdrive protection
Enclosure Trapezoidal, injection-molded, polypropylene with perforated steel grille, 2 x Handles (left and right sides)
Mounting / Installation 36mm standard pole-mount, suspended with integral M10 points, wedge monitor
Dimensions (HxWxD) 528mm x 332mm x 315mm (20.8" x 13.1" x 12.4")
Weight 27.1 lbs / 12.3 kg