MIXERS
MX
MX
MX.8
Back![](/products/mx.8/Main/mx.8.jpg)
- Input Channels
- Mono (Mic/Line): 4, Stereo (Line): 4
- Output Channels
- Stereo Out: 2, Monitor Out: 1, Phones: 1, Aux Send: 1
- On-board processors
- 24 programs, Parameter Control: 2, Foot switch: 1
MX.8 | |
Mixing capability | On-board processors: 24 programs, PARAMETER control: 2, FOOT SW: 1 |
I/O | Phanton Power +48V / USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit |
Input Channels | Mono [MIC/LINE]: 4, Stereo [LINE]: 4 |
Output Channels | STEREO OUT: 2, MONITOR OUT: 1, PHONES: 1, AUX SEND: 4 |
Bus | Stereo: 1, AUX (FX): 1 |
Input Channel Function | HPF: 120 Hz, 12 dB/oct (Mono/Stereo: MIC only) / COMP: 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec / EQ HIGH: Gain: +15 dB/-15 dB, Frequency: 12 kHz shelving / EQ MID: Gain: +12 dB/-12 dB, Frequency: Mono 100 Hz – 8 kHz peaking, Stereo 2.5 kHz peaking / EQ LOW: Gain: +15 dB/-15 dB, Frequency: 80 Hz shelving / PEAK LED: LED turns on when post EQ signal reaches 3 dB below clipping / Level Meter 2x |
Total harmonic distortion | 0.03 % @ +0dBu (20 Hz to 20kHz), GAIN knob: Min. |
Frequency response | +0.5 dB/-1.5 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min. |
Hum & noise level | Equivalent input noise: -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) / Residual output noise: -100 |
Crosstalk | -85 dB |
Power requirements | DC15 V/0.8A, Cable length = 1.5m), AC 100 – 240 V, 50 / 60 Hz |
Power consumption | 12 W |
Dimensions | W: 282mm / H: 55.4mm / D: 296.1mm |