SWIFT 25 Line Array System


SWIFT 25 Mid / High Unit
System Type 5" 2-way Passive System
Output Power 120W (CONTINUOUS) , 240W (PROGRAM)
Sensitivity (1W/1M) 95dB
Maximum SPL @ 1m 115,5dB Max. (calculated)
Frequency Response 90Hz-20kHz (-10dB)
Impedance 16 ohms
Transducer Low 2 x 5'' Woofer, 1,18'' (30mm) Voice Coil
Transducer High 1 x 1" Tweeter, 1" (25mm) Voice Coil
Crossover Frequency 2kHz Passive
Dispersion(-6dB) 100° Horizontal, 12° Vertical (one module)
Attachment Points Adjustable Rigging System, Vertical Splay Adjustable in 1.5° Increments from 0°- 12°
Connectors 2 x SPK4 Style
Enclosure Construction Polypropylene Enclosure with side handles, steel Metal Grille with foam
Fittings information Steel Stirrup Material, 3 Flying Points
Dimensions (HxWxD) (W) 161mm x (H) 430mm x (D) 304mm; (W) 6,34" x (H) 16,93" x (D) 11,97"
Net Weight 8kg / 17,64 lbs
Stereo Mode (Both Channels Drive) 4 ohms (RMS) 500W x 4 / 8 ohms (RMS) 250W x 4
Bridge Mono Mode Input Sensitivity (Limit Off) 8 ohms (RMS) 1000W x 2
Input Sensitivity 0.9-1.1V (0+/-1dBv)
Input Impedance 20k ohms balanced or 10k Ohms unbalanced
Frequency Response 20Hz ~ 20KHz (+0/-1dB) (at 10dB Rated Output Power 8 ohms)
Voltage Gain 34+/- 0.5dB
THD+N (Ref.1K 1/8 Rated Power, A-Weighted) <0.15%
S/N rate (Ref. Rated Power, A-Weighted) >95dB
Crosstalk (Below Rated Power) >50dB
Damping Factor (1K 8 ohms) >180
Power Supply Switching Power Class D
Model Passive KS 18 SUB
System Type Bass Reflex Subwoofer
Transducer Low 18" Woofer, 3" voice coil
Frequency Response 40Hz - 200Hz (-6dB)
Crossover Frequency 500Hz
Nominal Impedance 8 Ohms
Max SPL 128dB Max.
Power Rating 500W RMS / 1000W PROGRAM
Input Connector 2 x NL4 (Pin1+, Pin1-)
Enclosure Construction Plywood cabinet, resistant black paint, metal grille, rubber feet,two handles
Mounting Metal pole-mount
Dimensions (HxWxD) 535 x 661x 515.5mm / 21.06" x 26.02 x20.3"
Net Weight
Volume 10.441 CFT